Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 354
Stub router on startup interval time: User specified time interval (seconds) to advertise itself as stub area.
The field is significant only when the on-startup mode is enabled. The allowed range is 5 to 86400 seconds.
Stub router during shutdown period: Configures OSPF to advertise a maximum metric during shutdown for a
configured period of time. The device advertises a maximum metric when the OSPF router mode is disabled and
notice that the mechanism also works when the device reboots but not for the 'reload default' case.
Stub router on shutdown interval time: User specified time interval (seconds) to wait till shutdown completed.
The field is significant only when the on-shutdown mode is enabled.. The allowed range is 5-100 seconds.
Stub router administrative mode: Configures OSPF stub router mode administratively applied, for an indefinite
period.
Default Route Redistribution Metric Type: The OSPF redistributed metric type for a default route.
None: The default route are not redistributed.
External Type 1: External Type 1 of the default route.
External Type 2: External Type 2 of the default route.
Default Route Redistribution Metric value: User specified metric value for a default route. The field is
significant only when the argument 'DefaultRouteRedistIsSpecificMetric' is TRUE. The allowed range is
0 - 16777214.
Auto: The redistributed metric is the same as the original metric value.
Specific: User specified metric for the default route.
Default Route Redistribution Always: Specifies to always advertise a default route into all external-routing
capable areas. Otherwise, the router only to advertise the default route when the advertising router already has a
default route.
Administrative Distance: The OSPF administrative distance. Administrative Distance must be an integer value
between 1 and 255.
Buttons
Clear OSPF Process: Click to reset the current OSPF process.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Messages:
Administrative Distance must be an integer value between 1 and 255.
Stub router on startup interval must be an integer value between 5 and 86400
Default route Redistribute Metric must be an integer value between 0 and 16777214
RIP Redistribute Metric must be an integer value between 0 and 16777214
To Next Page
Loading...
Need help?
General
