MacDon M205 - Page 120

214603 100 Revision A
1009997
DWA AUTO UP / DOWN?
NO/YES
C###
X###
D
C
B
A
Figure 3.91: M205 DWA Auto Up/Down
7. Press right arrow (C) to select YES. Press SELECT (D).
• DWA AUTO UP/DOWN? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
NOTE:
If the Operator selects YES, the DWA Auto-Up function
will be activated by the GSL Reel Fore-Aft button.
8. Press right arrow (C) to select YES. Press SELECT (D).
9. Press PROGRAM (A) to exit programming mode or
press SELECT (D) to proceed to next windrower
setup action.
OPERATOR’S STATION