List of Revisions
At MacDon, we’re continuously making improvements: occasionally these improvements impact product
documentation. The following list provides an account of major changes from the previous version of this
document.
Summary of Change
Location
Changed the publication part number from 147955 to
214603.
—
Added Declaration of Conformity. Declaration of Conformity, page 3
Added D1 SP header compatibility.
Throughout.
Updated illustrations to show beacons and engine air
precleaner.
2.4 Component Location, page 37
Added swath compressor information to the CDM
display tables.
3.19.3 Operating Screens, page 78
• Updated illustrations of front wiper switch.
• Added illustrations of beacon/clearance switch for
Russian-configured windrower.
3.7 Exterior Lighting, page 49
Revised note to say that the two front corner field lights
remain on when the auto road light feature is activated.
• 3.7.1 Field Light: Cab-Forward, page 50
• Driving on the Road, page 179
Changed swath roller to swath compressor. Double Windrow Attachment (DWA) / Swath
Compressor Switch (if installed), page 75
Added topic.
3.19.12 Calibrating the Swath Compressor Sensor,
page 131
Added topic.
Converting from Transport Mode to Field Operation,
page 189
Added illustration showing DWA crop delivery. 4.4.10 Using the Double Windrowing Attachment, page
213
Added swath compressor section.
4.4.11 Swath Compressor (Option), page 215
• Added reference to union fittings required to hard
plumb R85 16-ft. header to M205.
• Added reference to Hydraulic Coupler kit
(MD #B5497).
4.8 Operating with an R Series Header, page 281
Updated engine interlock information. Checking Engine Interlock, page 296
Updated air intake illustration and description.
5.8.4 Air Intake System, page 317
Changed H
2
O level from 2.5 in. to 25 in.
Air Filter Restriction Indicator, page 317
214603 ii Revision A
To Next Page
Loading...
