R&S ZNB - Page 837

Command Reference
R&S
®
ZNB/ZNBT
837User Manual 1173.9163.02 ─ 55
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 614
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:CURRent:COUNt?
Returns at how many frequencies the Delta-L algorithm calculates the loss-per-inch
uncertainties.
Use CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:CURRent? to query the list
of frequencies.
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 614
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:DEFault?
Returns the frequencies at which the Delta-L algorithm calculates the loss-per-inch
uncertainties per default.
You can either use the algorithms's default or custom frequencies (see CALCulate:
FMODel:DELT<Ph_pt>:FREQuencies:USEDefault).
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 614
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:DEFault:COUNt?
Returns the number of frequencies at which the Delta-L algorithm calculates the loss-
per-inch uncertainties per default.
Use CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:DEFault? to query the
frequencies.
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 614
SCPI Command Reference