MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-54 SM
5148 Size Detection Off
This SP switches off paper size detection for the paper feed trays in the LCT. Each tray
scan be selected independently. The number of trays displayed will depend on whether
the LCT and bypass unit are installed.
005 Tray 4 (0 :ON 1:OFF)
006 Tray 5 (0 :ON 1:OFF)
007 Tray 6 (0 :ON 1:OFF)
5158 Cover Feeder Size Change
This SP sets the priority paper size setting for the cover interposer tray.
001 Priority (All) 0: A3
1: 12"x18"
002 EU/CH 0: 8½" x 13"
1: 8½" x 13"
2: 8¼" x 13"
003 NA 0: 8½" x 14"
1: 8½" x 13"
004 NA 0: LT LEF
1: 10½" x 7¼"
005 NA 0: LT SEF
1: 8" x 10"
006 EU/CH 0: Taiwan 8-Kai
1: DLT
007 EU/CH 0: Taiwan 16-Kai
1: LT SEF
008 EU/CH 0: Taiwan 16-Kai
1: LT LEF
5162 App. Switch Method
Controls if the application screen is changed with a hardware switch or a software
switch.
[0~1/1]
0: Soft Key Set
1: Hard Key Set
5169 CE Login
If you will change the printer bit switches, you must ‘log in’ to service mode with this SP
before you go into the printer SP mode.
[0~1/1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
To Next Page
Loading...
