ST STM32F101xx

RM0008 Overview of the manual
Doc ID 13902 Rev 12 43/1096
Legend for Table 2:
•
The section in this row must be read when using the peripherals in columns
marked with “
•"
◊
The section in this row can optionally be read when using the peripherals in
columns marked with
“◊"
Table 2. Sections related to each peripheral
Backup registers (BKP)
General-purpose I/Os (GPIOs)
Analog-to-digital converter (ADC)
Digital-to-analog converter (DAC)
Advanced-control timers (TIM1&TIM8)
General-purpose timers (TIM2 to TIM5)
General-purpose timers (TIM9 to TIM14)
Basic timers (TIM6&TIM7)
Real-time clock (RTC)
Independent watchdog (IWDG)
Window watchdog (WWDG)
Flexible static memory controller (FSMC)
Secure digital input/output interface (SDIO)
USB full-speed device (USB)
Controller area network (bxCAN)
Serial peripheral interface (SPI)
Inter-integrated circuit (I2C) interface
USART
USB on-the-go full-speed (OTG_FS)
Ethernet (ETH)
Section 2:
Documentation
conventions
•••••••••••• ••••••••
Section 3: Memory and
bus architecture
•••••••••••• ••••••••
Section 4: CRC
calculation unit
Section 5: Power
control (PWR)
•••••••••••••••••••
•
Section 6: Backup
registers (BKP)
•◊
Section 7: Low-,
medium-, high- and XL-
density reset and clock
control (RCC)
•••••••••••• ••••••••
Section 8: Connectivity
line devices: reset and
clock control (RCC)
•••••••••••• ••••••••
Section 9: General-
purpose and alternate-
function I/Os (GPIOs
and AFIOs)
◊••••••
◊
••• ••••••••
Section 10: Interrupts
and events
◊◊◊◊◊◊◊◊ ◊◊◊◊◊◊◊◊◊◊
Section 13: DMA
controller (DMA)
◊◊◊ ◊ ◊◊ ◊◊ ◊◊◊