User's Manual 102 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
9.3 Configuring Media Streaming
The procedure below describes how to configure the media streaming parameters.
To configure media streaming parameters:
1. In the 'Voice Over IP' screen, click the Media Streaming tab; following screen
appears.
Figure 9-4: Media Streaming Tab Screen
2. Select the 'Enabled' check box under "Wide-Band Restrictions", to restrict Wide-band
codecs on FXS ports.
3. Configure the parameters, as required. For a description of the parameters displayed
on this screen, see Table 9-5.
4. Click OK to save your settings.
To Next Page
Loading...
