User's Manual 284 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
5. Click OK to save your changes.
6. Click OK once more in the 'DHCP Settings' screen.
7. Change the device's WAN to operate in routing mode:
a. On the menu bar, click the Network Connections menu; the 'Network
Connections' screen appears.
b. Click the Edit icon corresponding to the WAN Ethernet connection; the 'WAN
Ethernet Properties' screen appears.
c. Click the Routing tab.
d. From the 'Routing Mode' drop-down list, select 'Route'.
e. Click OK to save the settings.
15.1.3 Viewing DHCP Clients
The procedure below describes how to view a list of hosts (computers) that are allocated IP
addresses by the DHCP server.
To view a list of computers currently recognized by the DHCP server:
1. In the 'IP Address Distribution' screen, click the Connection List button; the 'DHCP
Connections' screen appears.
Figure 15-5: DHCP Connection Screen
15.1.4 Configuring Static DHCP Clients
The procedure below describes how to define a static (fixed) IP address for a DHCP client.
To define a DHCP client with a fixed IP address:
1. In the 'IP Address Distribution' screen, click the Connection List button; the 'DHCP
Connections' screen appears.
2. Click the New icon; the 'DHCP Connection Settings' screen appears.
To Next Page
Loading...
Need help?
General
