User's Manual 306 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
17.2.1 Disk Partitions
This section describes how to configure partition and format storage devices.
17.2.1.1 Connecting a Mass Storage Device
To set up a file server that is shared by all LAN computers, you need to connect a mass
storage device (e.g. disk-on-key or hard drive) to the USB port on the device. A mass
storage device must first be partitioned and formatted. If your device is already partitioned,
it is recommended that you delete its partitions before proceeding, as a partition can only
be added on unallocated disk space.
To add a Windows formatted partition:
1. In the Disks table in the 'Disk Management' screen, click the disk device link. The
'Disk Information' screen appears.
Figure 17-7: Disk Information
To Next Page
Loading...
