User's Manual 440 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
30.7 Activating or Deactivating Automatic Answer
Auto Answer allows you to answer an incoming call by simply picking up the handset from
the charging cradle/base. When this function is activated, you do not need to press a key to
answer the call.
To activate or deactivate Auto Answer feature:
1. In idle state, press the Menu softkey.
2. Press the navigation keys to scroll to the HS Settings
icon, and then
press the Select softkey.
3. Press the navigation keys to choose the Auto Answer option, and then press the
Select softkey.
4. Press the navigation keys to choose whether you want to activate Auto Answer
(On option) or deactivate it (Off option).
5. Press the Select softkey to save your settings.
30.8 Selecting a Base Station
Your handset can only operate with one base unit. If your handset is registered to more
than one base unit, you can select the base unit to use.
To select a base for the handset:
1. Press the Menu softkey.
2. Press the navigation keys to scroll to the HS Settings
icon, and then
press the Select softkey.
3. Press the navigation keys to choose the Select Base option, and then press the
Select softkey.
4. Press the navigation keys to choose the desired base unit, and then press the
Select softkey; if the selected base is successfully found, “Saved!” is displayed;
otherwise, “Fail” is displayed.
Note: The currently used base is displayed with an asterisk “*”.
To Next Page
Loading...
Need help?
General
