To Next Page

To Previous Page

User's Manual 432 Document #: LTRT-23510

MP-26x/MP-27x Multimedia Home Gateway

29.1.3 Setting the Time and Date

You can set the current time and date.

 To set the time and date:

1. In idle state, press the Menu softkey.

2. Press the

navigation keys to scroll to the Clock/Alarm

icon, and then

press the Select softkey to access the menu.

3. Press the navigation keys to choose the Set Date/Time option, and then press the

Select softkey.

4. Press the navigation keys to access the time or date area.

5. To set the time:

• To move between hours, minutes and AM/PM (depending on format), use the

navigation keys.

• If the selected format is 12 hours (see Section 29.1.2 on page 431), then to select

AM or PM, use the navigation keys.

6. To set the date, use the navigation keys to move between day, month and year.

Set the date according to the format that you selected in Section 29.1.2 on page 431.

Note: If you enter an invalid value, an error tone is emitted and the cursor flashes on

the incorrect entry.

7. Press the OK softkey to save the new date and time.

AudioCodes MP-26 series User Manual

Questions and Answers: