User's Manual 166 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
Figure 12-20: PPPoE Connection Summary
7. Select the 'Edit the Newly Created Connection' check box if you wish to be routed to
the new connection's configuration screen after clicking Finish.
8. Click Finish to save the settings; the new PPPoE connection is added to the ‘Network
Connections’ screen.
12.1.2.2 External Cable Modem without Authentication
The procedure below describes how to configure an Internet connection when the device is
connected to an external Cable modem and the ITSP does not require a username nor
password to connect.
To create an Ethernet connection for external Cable modem:
1. In the 'Network Connections' screen, click the New icon; the 'Connection Wizard'
screen appears.
2. Select the Internet Connection option, and then click Next; the ‘Internet Connection’
screen appears.
Figure 12-21: Internet Connection – Underlying Device
3. From the ‘Underlying Device’ drop-down menu, select the Underling Device, and then
click Next.
To Next Page
Loading...
Need help?
General
