User's Manual 3. Hardware Description
Version 4.4.0 29 MP26x/MP27x
3 Hardware Description
This section describes the physical description and cabling of the device.
3.1 Physical Description
The device provides ports, buttons, and LEDs on its front and rear panels.
3.1.1 Front Panel
The front panel provides LEDs for displaying various operating status and button(s) for
activating various features such as Wi-Fi. The type of LEDs and buttons depend on the
model. For more information on the LEDs, see Section 3.1.1.2 on page 31. For more
information on the buttons, see Section 3.1.1.1 on page 30.
The figures below display the front panels of the MP-264 models.
Figure 3-1: Front Panel of Models without DECT (e.g., MP-264)
WiFi Button
To Next Page
Loading...
