AudioCodes MP-26 series User Manual

User's Manual 52 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
5.2 Menu Bar Description
The Web interface screens are conveniently grouped into related themes under specific
menus. These menus are located in the menu bar. The table below describes these
menus.
Table 5-1: Menu Description
Menu Description
Home Displays the Map View (refer to Chapter 6 on page 65).
Quick Setup
Displays the 'Quick Setup' screen for quickly
setting up an Internet connection with
the device (see Section 8.1 on page 73).
Network
Connections
Displays the 'Network Connections' screen for configuring network connections:
 LAN (see Section 12.2 on page 177)
 WAN (see Chapter 12 on page 153)
 VLANs (see Section 12.4 on page 213)
 LAN-WAN bridging (see Section 12.5 on page 221)
Security
Displays the 'Security' screen for configuring security-related features such as
Website restrictions (see Chapter 14 on page 253).
Voice Over IP
Displays the 'Voice Over IP' screen for configuring the VoIP parameters to use
the
device's VoIP functionality to place and receive calls over the Internet using a
standard telephone set and DECT handset (see Chapter
9 on page 89).
QoS
Displays the 'Quality Of Service' screen for configuring Quality of Service (QoS)
for the device (see Chapter 11 on page 135).
Advanced
Displays the 'Advanced' screen for configuring system parameters (e.g., DHCP
server and DNS) and for administrative functions (e.g.,
changing password, setting
date and time, and upgrading the system).
Icon Name Description
3G
Displays 3G dongle status and 3G dongle
access codes (see Section 4.2.3 page 46).
About MP2xx
Displays technical information about the
device, including version number (see
Section 19.1 on page 345).
Backup and
Restore
Backup user and system data (see Section
19.3 on page 348).
Certificates
Manages digital certificates (see Section
13.3 on page 232).
Configuration
File
Loads the Configuration File to the device
(see Section 19.5 on page 353).
Note: You can hide the Configuration File
icon, by running the following CLI command
in a Telnet session with the device:

AudioCodes MP-26 series Specifications

General

Brand	AudioCodes
Model	MP-26 series
Category	Gateway
Language	English