User's Manual 82 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
8.1.3.4 PPTP
The procedure below describes how to connect to the Internet by PPTP.
To configure PPTP connection:
1. Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Point-to-Point Tunneling Protocol (PPTP)'.
Figure 8-14: PPTP WAN Ethernet Connection
2. Configure the following (provided by your ITSP):
• PPTP Server Host Name or IP Address
• Login user name
• Login password
3. From the ‘Internet Protocol’ drop-down lists, select the method for assigning an IP
address (provided by your ITSP).
To Next Page
Loading...
