User's Manual 12. Network Connections
Version 4.4.0 159 MP26x/MP27x
6. Enter your PPPoE login username and password (provided by your ITSP).
7. If you selected the Manual PVC Settings option in the previous step, you also need to
configure the following:
• VPI and VCI pair of identifiers.
• Encapsulation method - LLC, VCMux, or VCMux HDLC.
Asynchronous Transfer Mode (ATM) is a network technology based on transferring
data in cells or packets of a fixed size. The cell used with ATM is relatively small
compared to units used with other technologies. The small, constant cell size allows
the transmission of video, audio, and computer data, assuring that no single type of
data consumes the connection. ATM addressing consists of two identifiers that identify
the virtual path (VPI) and the virtual connection (VCI). A virtual path consists of
multiple virtual channels to the same endpoint.
8. Click Next; the 'Connection Summary' screen appears:
Figure 12-9: Connection Summary Screen
9. Select the 'Edit the Newly Created Connection' check box if you want to perform
additional configurations after clicking Finish.
10. Click Finish to save the settings; the new PPPoE connection is added to the ‘Network
Connections’ screen.
To Next Page
Loading...
Need help?
General
