User's Manual 25. General Phone Operation
Version 4.4.0 411 MP26x/MP27x
25.2 Answering a Call
When you receive a call, your phone rings and the following is displayed on your screen:
“Incoming Call”
Calling number is displayed
To answer a call:
If the handset is not on the base: When the phone rings, press or .
If the handset is on the base and when Auto Answer is set to On: When the
phone rings, pick up the handset.
25.3 Answering or Rejecting a Second Call
While you are talking on the phone, you can receive a second call. The phone provides the
following indications of a second incoming call:
A beep tone is sounded.
The “Call Waiting” message is displayed on the screen with the details (name and
number) of the calling party.
To answer a second call:
Press to answer the call; the call with the second call party is established and
the first call is put on hold.
To reject a second call:
Press to reject the second call.
Once you have answered the second call, you can toggle between the calls by placing one
call on hold and speaking to the other call (see Section 25.13.4 on page 418).
25.4 Ending a Call
To end call, you can do one of the following:
Press .
Place the handset on the charger.
When you end the call, the screen displays “Released”.
To Next Page
Loading...
Need help?
General
