To Next Page

To Previous Page

User's Manual 31. Base Settings

Version 4.4.0 445 MP26x/MP27x

31.2 Changing the PIN Number

A four-digit personal identification number (PIN) number is required for changing various

settings of the base unit. The PIN number is used to protect your phone against

unauthorized use. The default system PIN number is 0000.

 To change the PIN number:

1. Press the Menu softkey.

2. Press the navigation keys to scroll to the Base Settings

icon, and

then press the Select softkey.

3. Press the navigation keys to choose the Modify PIN option, and then press the

Select softkey.

4. In the Old PIN field, enter the current PIN number, and then press the OK softkey.

5. In the New PIN field, enter a new four-digit PIN number, and then press the OK

softkey.

6. In the Confirm field, enter the new PIN number again, and then press the OK softkey;

the new PIN number is saved and “Saved” is displayed.

Note: If the old PIN code is incorrect, “Old PIN Invalid” is displayed and you are

returned to the Modify PIN option.

31.3 Resetting the Base to Factory Defaults

You can reset your base settings to default settings. When you reset the base, all your

settings related to the base are deleted and restored to factory defaults, except your

phonebook entries which remain unchanged.

 To reset the base to factory defaults:

1. Press the Menu softkey.

2. Press the navigation keys to scroll to the Base Settings

icon, and then

press the Select softkey.

3. Press the navigation keys to choose the BS Default option, and then press the

Select softkey; you are prompted to enter your PIN number.

4. For certain phones you may be prompted to enter your four-digit PIN number, and

then press the OK softkey. (For defining the PIN number, see Section 31.2 on 445.)

5. Press the OK softkey again to confirm reset; if the PIN code is correct and the base is

restored to default, a confirmation tone is played and “Reset” is displayed. If the PIN

code is incorrect, “PIN Invalid” is displayed and you are unable to restore the base to

defaults.

AudioCodes MP-26 series User Manual

Questions and Answers: