User's Manual 12. Network Connections
Version 4.4.0 155 MP26x/MP27x
12.1.1 WAN DSL Connections
You can configure the following WAN DSL connection types:
Determine Protocol Type Automatically (PVC scan) – see Section 12.1.1.1 on page
157
Point-to-Point Protocol over Ethernet (PPPoE) – see Section 12.1.1.2 on page 158
Point-to-Point Protocol over ATM (PPPoA) – see Section 12.1.1.3 on page 160
Routed Ethernet Connection over ATM (Routed ETHoA) – see Section 12.1.1.4 on
page 161
LAN-WAN Bridged Ethernet Connection over ATM (Bridged ETHoA) – see Section
12.1.1.4 on page 161
Routed IP over ATM (IPoA) – see Section 12.1.1.5 on page 163
If you have established a WAN ATM over DSL connection, you can view the properties of
this connection as described below.
To view the WAN ATM over DSL properties:
In the ‘Network Connections’ screen, click the Edit icon corresponding to the WAN
ATM over DSL network connection; the ‘WAN ATM over DSL Properties’ screen
appears:
Figure 12-3: WAN ATM over DSL Properties
To Next Page
Loading...
Need help?
General
