User's Manual 19. Maintenance
Version 4.4.0 349 MP26x/MP27x
3. Under the Daylight Saving Time group, configure the daylight saving settings for your
time zone (if they are not automatically detected):
• Enabled: Select this check box to enable daylight saving time.
• Start: Date and time when daylight saving starts.
• End: Date and time when daylight saving ends.
• Offset: Daylight saving time offset.
4. For the device to perform an automatic time update, under the Automatic Time
Update group, do the following:
a. Select the 'Enabled' check box.
b. Select the protocol to be used for time update, by selecting either the 'Time of
Day' or 'Network Time Protocol' option.
c. In the 'Update Every' field, specify how often to perform the update.
d. You can define NTP servers, by clicking the New icon; the ‘Time Server
Settings’ screen appears.
Figure 19-5: Time Server Settings Screen
e. In the ‘Time Server’ field, enter the IP address of the Time server (NTP), and then
click OK.
To Next Page
Loading...
Need help?
General
