User's Manual 410 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
25.1.4 Calling from the Call List
You can dial numbers from previously received or missed calls, which are stored in the Call
List:
1. Press the navigation key to access the Call List.
2. Press the navigation keys to select the desired entry, and then press the Select
softkey.
3. Press or to dial the selected entry.
25.1.5 Establishing a Second Call
While you are in an active call, you can establish a second call. When you establish a
second call, the first call is put on hold. You can toggle between the calls by placing one
call on hold while speaking to the other call (see Section 25.13.4 on page 418).
To establish a second call, do one of the following:
Making a second call directly:
1. Press ; the Predialing screen appears.
2. Dial the desired number, and then press again.
Making a second call to a contact in your phonebook:
1. Press the Menu softkey, and then choose Phonebook.
2. Select a number from the phonebook, and then press .
Manually placing the first call on hold before making a second call:
1. Press the Hold softkey to place the current call on hold.
2. Establish a second call by doing one of the previously mentioned methods.
25.1.6 Redialing a Number
You can dial numbers that were previously dialed, which are stored in the Redial List.
1. Press the navigation key to access the Redial List.
2. Press the navigation keys to select the desired number, and then press the Select
softkey.
3. Press or to dial the selected entry.
To Next Page
Loading...
Need help?
General
