User's Manual 15. Advanced Networking Features
Version 4.4.0 291 MP26x/MP27x
15.4 Configuring Routing Rules
This section describes how to configure routing rules and enable routing protocols. These
are configured in the ‘Routing’ screen, as described below.
To access the Routing screen:
In the 'Advanced' screen, click the Routing icon; the 'Routing' screen appears.
Figure 15-11: Routing Rules
15.4.1 Managing Routing Table Rules
The procedure below describes how to add routing rules.
To add routing tables:
1. In the 'Advanced' screen, click the New icon in the Routing Table; the 'Route
Settings' screen appears.
Figure 15-12: Route Settings Screen
2. From the ‘Name’ drop-down list, select the network device for which you want to add a
routing rule.
To Next Page
Loading...
Need help?
General
