User's Manual 12. Network Connections
Version 4.4.0 177 MP26x/MP27x
12.2 LAN Connection
This section describes how to configure the following the device LAN connections:
Wireless LAN
LAN hardware Ethernet switch
12.2.1 Wireless LAN
This section describes how to configure the device wireless network. This network is
configured in the ‘Network Connections’ screen, which provides a connection wizard that
guides you through the network configuration stages.
Notes:
• To establish a wireless network connection between a PC and the device,
you must also configure the PC for wireless connectivity (see Section 7.2
on page 71).
• You can also configure and enable the wireless LAN in the 'Quick Setup'
screen.
To configure the Wireless LAN:
1. From the menu bar, click the Network Connections menu; the 'Network Connections'
screen appears.
Figure 12-40: Network Connections Screen Displaying LAN Wireless Interface
The 'Status' column corresponding to the wireless LAN network (‘LAN Wireless
802.11n Access Point’) displays whether the wireless connection is enabled or
disabled.
2. Click the Edit icon corresponding to the 'LAN Wireless 802.11n Access Point'
network name; the 'LAN Wireless 802.11n Access Point Properties' screen appears,
displaying the contents of the General tab.
To Next Page
Loading...
Need help?
General
