User's Manual 234 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
f. In the 'Certificates' screen, click the Download icon corresponding to the new
self-signed certificate that you created; the 'File Download' window appears.
Figure 13-7: File Download Window (e.g., MP-264)
g. Click Save, and then browse to the folder to where you want to save the file; the
file is saved as a *.crt file.
3. Configure the Apache server, by configuring the SSLCACertificateFile parameter to
point to the location where the certificate file is located. Since this is a self-signed
certificate, you are also considered the CA.
4. Load the self-signed certificate to the device:
a. In the 'Certificates' screen, click the Upload Certificate link; the ‘Load MP264’s
Local Certificate’ screen appears.
Figure 13-8: Load MP264’s Local Certificate (e.g., MP-264)
b. Click Browse, locate the certification file that you created, and then click Upload
to load the file.
To Next Page
Loading...
