EasyManuals Logo

AudioCodes MP-26 series User Manual

AudioCodes MP-26 series
464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #243 background imageLoading...
Page #243 background image
User's Manual 13. Remote Device Management
Version 4.4.0 243 MP26x/MP27x
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
RTPRedundancy
- Support for RTP payload redundancy as
defined in RFC 2198. A true value indicates
support for
VoiceService.{i}.VoiceProfile.{i}.RTP.Redunda
ncy.
SignalingProtocols voip/signalling/protocol
Signal protocol:
“SIP”
“MGCP”
Each entry can be appended with a version
indicator in the form “/X.Y”. For example:
“SIP/2.0”.
Note: Only one protocol is supported at a
time.
SRTP
- Support for SRTP.
Note: Currently, SRTP is not supported.
ToneGeneration
- Support for tone generation. A true value
indicates support for the object
VoiceService.{i}.VoiceProfile.{i}.Tone.
A true value also indicates that the
ToneDescriptionsEditable,
PatternBasedToneGeneration and
FileBasedToneGeneration parameters in this
object are present.
VoicePortTests
- Support for remotely accessible voice-port
tests. A true value indicates support for the
VoiceService.{i}.PhyInterface.{i}.Tests object.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MP-26 series and is the answer not in the manual?

AudioCodes MP-26 series Specifications

General IconGeneral
BrandAudioCodes
ModelMP-26 series
CategoryGateway
LanguageEnglish

Related product manuals