AudioCodes MP-26 series User Manual

User's Manual 13. Remote Device Management
Version 4.4.0 249 MP26x/MP27x
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
OutgoingCalls
Attempted
-
Total outgoing calls attempted.
OutgoingCalls
Answered
- Total outgoing calls answered by the called
party.
OutgoingCalls
Connected
- Total outgoing calls that successfully
completed call setup signaling.
OutgoingCallsFailed
- Total outgoing calls that failed to
successfully complete call setup signaling.
CallsDropped
- Total calls that were successfully connected
(incoming or outgoing), but dropped
unexpectedly while in progress without
explicit user termination.
TotalCallTime
- Cumulative call duration (in seconds).
ServerDownTime
- The number of seconds the device is unable
to maintain a connection to the server.
Applies only to SIP.
ReceivePacketLoss
Rate
mt_voip_get_state(line,
state)
Current receive packet loss rate (in
percentage).
FarEndPacketLoss
Rate
- Current far-end receive packet lost rate (in
percentage).
ReceiveInterarrival
Jitter
- Current receive interarrival jitter (in
microseconds).
FarEndInterarrival
Jitter
- Current Interarrival jitter (in microseconds)
as reported from the far-end device via
RTCP.
RoundTripDelay mt_voip_get_state
Current round-trip delay (in microseconds).
AverageReceive
InterarrivalJitter
- Average receive interarrival jitter (in
microseconds) since the beginning of the
current call.
AverageFarEnd
InterarrivalJitter
- Average far-end interarrival jitter (in
microseconds) since the beginning of the
current call.
AverageRoundTrip
Delay
- Average round-trip delay (in microseconds)
since the beginning of the current call. This
is the average of the RoundTripDelay
statistics accumulated each time the delay is
calculated.

AudioCodes MP-26 series Specifications

General

Brand	AudioCodes
Model	MP-26 series
Category	Gateway
Language	English