User's Manual 9. Configuring VoIP Parameters
Version 4.4.0 93 MP26x/MP27x
Parameter Description
Redundant Proxy Address
Defines the IP address of the redundant proxy.
Note: This parameter is available only if the 'Use Redundant Proxy’
check box is selected.
Redundant Proxy Port
Defines the port of the redundant proxy.
Note: This parameter is available only if the 'Use Redundant Proxy’
check box is selected.
Redundant Proxy Keep Alive
Period
Defines the interval between keep-alive packets (SIP OPTIONS)
which are used by the proxy redundancy mechanism to check the
connection status.
Note: This parameter is available only if the 'Use Redundant Proxy’
check box is selected.
Switch back to Primary SIP
proxy when available
When selected, the device switches back to the primary proxy server
when communication with it returns.
Use SIP Registrar
When selected, enables the use of a separate SIP registrar server.
Registrar Address
Defines the IP address or host name of the registrar server.
Note: This parameter is available only if the 'Use
box is selected.
Registrar Port
Defines the port (UDP or TCP) of the registrar server.
Note: This parameter is available only if the 'Use
box is selected.
Register Expires
Defines the registration timeout, in seconds.
Note: This parameter is available only if the 'Use SIP Registrar’ or
‘Use SIP Proxy IP and Port for Registration’ check box is selected.
Register Failed Expires
Defines the timeout between registration attempts in case of a
registration failure (e.g. due to a network problem).
Note: This parameter is available only if the 'Use SIP Registrar’ or
‘Use SIP Proxy IP and Port for Registration’ check box is selected.
Use SIP Outbound Proxy
When selected (default), an outbound SIP proxy is used (all SIP
messages are sent to this server as the first hop).
Note: This parameter appears only in 'Advanced' mode.
Outbound Proxy IP
Defines the IP address of the outbound Proxy. If this parameter is set,
all outgoing messages (including registration messages) are sent to
this Proxy according to the Stack behavior.
Note: This parameter is available only if 'Use SIP Outbound Proxy' is
selected.
Outbound Proxy Port
The Port on which the outbound Proxy listens.
Note: This parameter is available only if 'Use SIP Outbound Proxy' is
selected.
SIP Timers
Note: This group appears only in 'Advanced' mode.
Retransmission Timer T1
The SIP T1 retransmission timer according to RFC 3261
Retransmission Timer T2
The SIP T2 retransmission timer according to RFC 3261
Retransmission Timer T4
The SIP T4 retransmission timer according to RFC 3261
INVITE Timer
The SIP INVITE timer according to RFC 3261
To Next Page
Loading...
Need help?
General
