DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
92
To view the following window, click Management > NTP > NTP Interface Settings, as shown below:
Figure 4-74 NTP Interface Settings Window
The fields that can be configured are described below:
Parameter Description
NTP State
After click the Edit button, select to enable or disable the NTP state for the
specified VLAN interface here.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
NTP Associations
This window is used to view NTP association information.
To view the following window, click Management > NTP > NTP Associations, as shown below:
Figure 4-75 NTP Associations Window
Click the Show Detail button to view more detailed information about the entry.
After clicking the Show Detail button, the following window will appear:
To Next Page
Loading...
