DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
503
Figure 9-68 NetBIOS Filtering Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
NetBIOS Filtering State
Select to enable or disable the NetBIOS filtering state on the specified port(s).
This is used to permit or deny NetBIOS packets on physical ports.
Extensive NetBIOS Filtering
State
Select to enable or disable the extensive NetBIOS filtering state on the specified
port(s). This is used to permit or deny NetBIOS packets over 802.3 frames on
physical ports.
Click the Apply button to accept the changes made.
MAC Authentication
This window is used to display and configure the MAC authentication settings. MAC authentication is a feature
designed to authenticate a user by MAC address when the user is trying to access the network via the Switch. The
Switch itself can perform the authentication based on a local database or be a RADIUS client and perform the
authentication process via the RADIUS protocol with a remote RADIUS server.
To view the following window, click Security > MAC Authentication, as shown below:
To Next Page
Loading...
