DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
118
SD Card Management
This section refers to the configuration associated with removable devices which includes USB driver storage.
SD Card Backup Settings
This window is used to display and configure the SD card backup settings. This is used to create or modify an SD card
management backup schedule entry.
To view the following window, click Management > SD Card Management > SD Card Backup Settings, as shown
below:
Figure 4-107 SD Card Backup Settings Window
The fields that can be configured are described below:
Parameter Description
Backup Entry Settings
Enter the name of the SD card management backup schedule here. This string
can be up to 32 characters long.
Time Range
After clicking the Edit button, enter the time range schedule that will be used
here.
Type
After clicking the Edit button, select the backup type here. Options to choose from
are:
• Configuration - Specifies that this schedule is used to back up the
configuration.
• Log - Specifies that this schedule is used to back up the system log.
File Name
After clicking the Edit button, enter the destination filename and path here.
State
After clicking the Edit button, select to enable or disable this schedule here.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
SD Card Execute Settings
This window is used to display and configure the SD card execution settings. This is used to execute the configuration
from the SD card to the Switch file system manually.
To view the following window, click Management > SD Card Management > SD Card Execute Settings, as shown
below:
To Next Page
Loading...
