D-Link DGS-3630 SERIES - BGP Confederation Settings; BGP as Path Access List Settings

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
345
Parameter Description
here.
State
Select to enable or disable the BGP reflector client state here.
Click the Apply button to accept the changes made.
BGP Confederation Settings
This window is used to display and configure the BGP confederation settings.
To view the following window, click L3 Features > BGP > BGP Confederation Settings, as shown below:
Figure 6-185 BGP Confederation Settings Window
The fields that can be configured are described below:
Parameter Description
Confederation Identifier
Enter the BGP confederation ID here. The range is from 0 to 4294967295.
Confederation Peer
Select to Add or Delete a BGP confederation peer here. Enter the BGP
confederation peer ID here. The range is from 1 to 4294967295.
Click the Apply button to accept the changes made.
BGP AS Path Access List Settings
This window is used to display and configure the BGP AS path access list settings.
To view the following window, click L3 Features > BGP > BGP AS Path Access List Settings, as shown below: