DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
346
Figure 6-186 BGP AS Path Access List Settings Window
The fields that can be configured are described below:
Parameter Description
List Name
Enter the name of the AS path access list here. This name can be up to 16
characters long.
Mode
Select the mode here. Options to choose from are:
• Permit - Specifies that routes match condition is permitted.
• Deny - Specifies that routes match condition is denied.
• None - Specifies that no action will be taken.
Regular Expression
Enter the regular expression for the path filter here. This string can be up to 80
characters long.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the available entries.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
BGP Community List Settings
This window is used to display and configure the BGP community list settings.
To view the following window, click L3 Features > BGP > BGP Community List Settings, as shown below:
To Next Page
Loading...
