D-Link DGS-3630 SERIES - Crypto PKI Trustpoint

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
527
Parameter Description
SSL Status
Select to enable or disable the global SSL status here.
Service Policy
Enter the service policy name here. This name can be up to 32 characters long.
Click the Apply button to accept the changes made.
The fields that can be configured in Import File are described below:
Parameter Description
File Select
Select the file type that will be loaded here. Options to choose from are
Certificate and Private Key. After selecting the file type, browse to the
appropriate file, located on the local computer, by pressing the Browse button.
Destination File Name
Enter the destination file name used here. This name can be up to 32 characters
long.
Click the Apply button to accept the changes made.
Crypto PKI Trustpoint
This window is used to display and configure the crypto PKI trust point settings.
To view the following window, click Security > SSL > Crypto PKI Trustpoint, as shown below:
Figure 9-95 Crypto PKI Trustpoint Window
The fields that can be configured are described below:
Parameter Description
Trustpoint
Enter the name of the trust-point that is associated with the imported certificates
and key pairs here. This name can be up to 32 characters long.
File System Path
Enter the file system path for certificates and key pairs here.
Password
Enter the encrypted password phrase that is used to undo encryption when the
private keys are imported here. The password phrase is a string of up to 64
characters. If the password phrase is not specified, the NULL string will be used.
TFTP Server Path
Enter the TFTP server path here.
Type
Select the type of certificate that will be imported here. Options to choose from
are Both, CA, and Local.
• Selecting Both specifies to import the CA certificate, local certificate and key
pairs.
• Selecting CA specifies to import the CA certificate only.
• Selecting Local specifies to import local certificate and key pairs only.