DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
473
Parameter Description
List Name
Enter the method list name that will be used with the AAA accounting EXEC
option here.
Method 1 ~ Method 4
Select the method lists that will be used for this configuration here. Options to
choose from are none, group, radius, and tacacs+. The none option is only
available for Method 1.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
After clicking the AAA Accounting Commands tab, the following page will appear.
Figure 9-28 Accounting Settings (AAA Accounting Commands) Window
The fields that can be configured are described below:
Parameter Description
Level
Select the privilege level used here. Options to choose from are levels 1 to 15.
List Name
Enter the method list name that will be used with the AAA accounting commands
option here.
Method 1 ~ Method 4
Select the method lists that will be used for this configuration here. Options to
choose from are none, group, and tacacs+. The none option is only available for
Method 1.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RADIUS
RADIUS Global Settings
This window is used to display and configure the global RADIUS settings.
To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below:
To Next Page
Loading...
