DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
508
Figure 9-72 WAC Port Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the WAC feature on the port(s) specified.
Click the Apply button to accept the changes made.
WAC Customize Page
This window is used to display and configure the WAC customized login page.
To view the following window, click Security > Web-based Access Control > WAC Customize Page, as shown
below:
Figure 9-73 WAC Customize Page Window
To Next Page
Loading...
