DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
95
File System
This window is used to view, manage and configure the Switch file system.
To view the following window, click Management > File System, as shown below:
Figure 4-79 File System Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
Path
Enter the path string.
Click the Go button to navigate to the path entered.
Click the Copy button to copy a specific file to the Switch.
Click the c: hyperlink to navigate the C: drive
After clicking the c: hyperlink, the following window will appear:
Figure 4-80 File System (Drive) Window
Click the Go button to navigate to the path entered.
Click the Previous button to return to the previous window.
Click the Create Directory to create a new directory within the file system of the Switch.
Click the Copy button to copy a specific file to the Switch.
Click the Boot Up button to set a specific runtime image as the boot up image.
Click the Rename button to rename a specific file name.
Click the Delete button to remove a specific file from the file system.
To Next Page
Loading...
Need help?
General
