D-Link DGS-3630 SERIES - Log Backup to TFTP; Log Backup to RCP

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
618
Parameter Description
• When the System Log option is selected, the system log will be backed up.
• When the Attack Log is selected, the attack log will be backed up.
Click the Backup button to initiate the system log backup.
Log Backup to TFTP
This window is used to initiate a system log backup to a TFTP server.
To view the following window, click Tools > Log Backup > Log Backup to TFTP, as shown below:
Figure 15-19 Log Backup to TFTP Window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the TFTP server in the space provided.
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Destination File
Enter the destination path and location where the log file should be stored on the
TFTP server. This field can be up to 64 characters long.
Log Type
Select the log type that will be backed up to the TFTP server.
• When the System Log option is selected, the system log will be backed up.
• When the Attack Log is selected, the attack log will be backed up.
Click the Backup button to initiate the system log backup.
Log Backup to RCP
This window is used to initiate a system log backup to an RCP server.
To view the following window, click Tools > Log Backup > Log Backup to RCP, as shown below:
Figure 15-20 Log Backup to RCP Window