DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
20
Time and SNTP
Clock Settings
This window is used to display and configure the time settings for the Switch.
To view the following window, click System > Time and SNTP > Clock Settings, as shown below:
Figure 3-16 Clock Settings Window
The fields that can be configured are described below:
Parameter Description
Time
Enter the current time in hours (HH), minutes (MM), and seconds (SS) here. For
example, 18:30:30.
Date
Enter the current day (DD), month (MM), and year (YYYY) here. For example,
30/04/2015.
Click the Apply button to accept the changes made.
Time Zone Settings
This window is used to display and configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click System > Time and SNTP > Time Zone Settings, as shown below:
To Next Page
Loading...
