DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
229
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IPv4 Static Route BFD
This window is used to display and configure the IPv4 static route Bidirectional Forwarding Detection (BFD) settings.
To view the following window, click L3 Features > IPv4 Static Route BFD, as shown below:
Figure 6-22 IPv4 Static Route BFD Window
The fields that can be configured are described below:
Parameter Description
Interface Name
Enter the name of the interface that will be used to create the BFD session here.
This name can be up to 12 characters long.
IP Address
Enter the IP address of the BFD peer here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IPv4 Route Table
This window is used to display and configure the IPv4 route table settings.
To view the following window, click L3 Features > IPv4 Route Table, as shown below:
Figure 6-23 IPv4 Route Table Window
The fields that can be configured are described below:
To Next Page
Loading...
Need help?
General