DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
403
Figure 7-10 CoS Color Mapping Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
CoS List
Enter the CoS value that will be mapped to the color. This value must be between
0 and 7.
Color
Select the color option that will be mapped to the CoS value. Options to choose
from are Green, Yellow, and Red.
Click the Apply button to accept the changes made.
DSCP Color Mapping
This window is used to display and configure the DSCP color mapping settings.
To view the following window, click QoS > Advanced Settings > DSCP Color Mapping, as shown below:
To Next Page
Loading...
