DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
380
Parameter Description
Metric Type
Select the metric type of the redistributed routes here. Options to choose from
are:
• None - The metric type is not specified.
• Internal - The redistributed routes advertised with internal metrics.
• External - The redistributed routes advertised with external metrics.
Route Map
Enter the name of the route map that will be used here. This name can be up to
32 characters long.
Level
Select the routing level that will be used here. Options to choose from are Level-
1, Level-1-2, and Level-2 Only.
Click the Apply button to accept the changes made.
Click the Delete button to remove a specific entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ISIS Redistribute ISIS Settings
This window is used to display and configure the redistribute ISIS settings. This is used redistribute ISIS routes from
level 1 into level 2 and vice versa.
To view the following window, click L3 Features > ISIS > ISIS Redistribute ISIS Settings, as shown below:
Figure 6-227 ISIS Redistribute ISIS Settings Window
The fields that can be configured are described below:
Parameter Description
Protocol
Select the protocol that will be used here. Options to choose from are IPv4 and
IPv6.
Area Tag
Enter the ISIS area tag here. This can be up to 16 characters long.
From
Select the level of the routes that will be redistributed from here. Options to
choose from are Level-1 and Level-2.
Into
Select the level of the routes that will be redistributed to here. Options to choose
from are Level-1 and Level-2.
Distribute List
Enter the name of the distribution list here. This name can be up to 32 characters
long.
To Next Page
Loading...
