DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
613
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
TFTP Server IP
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the TFTP server in the space provided.
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Source File
Enter the source filename and path of the configuration file located on the TFTP
server here. This field can be up to 64 characters long.
Destination File
Enter the destination path and location where the configuration file should be
stored on the Switch. This field can be up to 64 characters long. Select the
running-config option to restore and overwrite the running configuration file on
the Switch. Select the startup-config option to restore and overwrite the start-up
configuration file on the Switch.
Replace
Select this option to replace the configuration file on the Switch with this one.
Click the Restore button to initiate the configuration restore.
Configuration Restore from FTP
This window is used to initiate a configuration restore from an FTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from FTP,
as shown below:
Figure 15-12 Configuration Restore from FTP Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
FTP Server IP
Enter the FTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the FTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the FTP server in the space provided.
TCP Port
Enter the TCP port number used for the FTP connection here. The range is from
1 to 65535.
User Name
Enter the user name used for the FTP connection here. This name can be up to
32 characters long.
Password
Enter the password used for the FTP connection here. This password can be up
to 15 characters long.
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
To Next Page
Loading...
