D-Link DGS-3630 SERIES - Dhcp; Service DHCP

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
52
Figure 4-25 Session Timeout Window
The fields that can be configured are described below:
Parameter Description
Web Session Timeout
Enter the time in seconds of the web session timeout. Tick the Default check box
to return to the default setting. The value is from 60 to 36000 seconds. The
default value is 180 seconds.
Console Session Timeout
Enter the time in minutes of the web session timeout. Tick the Default check box
to return to the default setting. The value is from 0 to 1439 minutes. Enter 0 to
disable the timeout. The default value is 3 minutes.
Telnet Session Timeout
Enter the time in minutes of the Telnet session timeout. Tick the Default check
box to return to the default setting. The value is from 0 to 1439 minutes. Enter 0 to
disable the timeout. The default value is 3 minutes.
SSH Session Timeout
Enter the time in minutes of the SSH session timeout. Tick the Default check box
to return to the default setting. The value is from 0 to 1439 minutes. Enter 0 to
disable the timeout. The default value is 3 minutes.
Click the Apply button to accept the changes made.
DHCP
Service DHCP
This window is used to display and configure the DHCP Relay service on the Switch.
To view the following window, click Management > DHCP > Service DHCP, as shown below:
Figure 4-26 Service DHCP Window
The fields that can be configured in Service DHCP are described below:
Parameter Description
Service DHCP State
Select this option to enable or disable the DHCP Relay service.
Click the Apply button to accept the changes made.
The fields that can be configured in Service IPv6 DHCP are described below: