DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
50
Figure 4-22 RMON Event Settings Window
The fields that can be configured are described below:
Parameter Description
Index
Enter the index value of the alarm entry here. The range is from 1 to 65535.
Description
Enter a description for the RMON event entry. The string is up to 127 characters
long.
Type
Select the RMON event entry type. Options to choose from are None, Log, Trap,
and Log and Trap.
Community
Enter the community string. The string can be up to 127 characters.
Owner
Enter the owner string. The string can be up to 127 characters.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the View Logs button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the View Logs button, the following window will appear.
Figure 4-23 RMON Event Settings (View Logs) Window
Click the Back button to return to the previous window.
Telnet/Web
This window is used to display and configure Telnet and Web settings on the Switch.
To view the following window, click Management > Telnet/Web, as shown below:
To Next Page
Loading...
