DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
26
PTP Port Global Settings
This window is used to display and configure the PTP interface settings.
To view the following window, click System > PTP (Precise Time Protocol) > PTP Port Global Settings, as shown
below:
Figure 3-21 PTP Port Global Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
State
Select to enable or disable the PTP feature on the port(s) specified here.
Click the Apply button to accept the changes made.
PTP Boundary Port Settings
This window is used to display and configure the attributes of the PTP boundary clock. The configuration takes effect
when the PTP device is of the ‘boundary’ type.
To view the following window, click System > PTP (Precise Time Protocol) > PTP Boundary Port Settings, as
shown below:
To Next Page
Loading...
