D-Link DGS-3630 SERIES - Rmon; RMON Global Settings

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
46
To view the following window, click Management > SNMP > SNMP Context Mapping Table Settings, as shown
below:
Figure 4-15 SNMP Context Mapping Table Settings Window
The fields that can be configured are described below:
Parameter Description
Context Name
Enter the SNMP View-based Access Control Model (VACM) context name here.
This name can be up to 32 characters long. The name must start with a letter and
end with a letter or digit. Interior characters can be letters, digits, and hyphens.
Instance ID
Enter the OSPF instance ID here. The range is from 1 to 65535.
Instance Name
Enter the ISIS routing area tag here. This name can be up to 12 characters long.
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
RMON
RMON Global Settings
This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for the
SNMP function on the Switch.
To view the following window, click Management > RMON > RMON Global Settings, as shown below:
Figure 4-16 RMON Global Settings Window
The fields that can be configured are described below:
Parameter Description
RMON Rising Alarm Trap
Select this option to enable or disable the RMON Rising Alarm Trap Feature.
RMON Falling Alarm Trap
Select this option to enable or disable the RMON Falling Alarm Trap Feature.
Click the Apply button to accept the changes made.