D-Link DGS-3630 SERIES - Qos PFC; Network Qos Class Map

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
413
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
Direction
Select the direction option here. Options to choose from are Input and Output.
Input specified ingress traffic and output specifies egress traffic.
Policy Map Name
Enter the policy map name here. This name can be up to 32 characters long.
Select the None option to not tie a policy map to this entry.
Click the Apply button to accept the changes made.
QoS PFC
Network QoS Class Map
This window is used to display and configure the network Quality of Service (QoS) Priority-based Flow Control (PFC)
class map settings.
To view the following window, click QoS > QoS PFC > Network QoS Class Map, as shown below:
Figure 7-20 Network QoS Class Map Window
The fields that can be configured are described below:
Parameter Description
Network QoS Class
Map Name
Enter the network QoS class map name to be associated with a traffic policy here. This
name can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Match button to configure the match rule settings for the map name.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Match button, the following page will appear.
Figure 7-21 Network QoS Class Map (Match) Window
The fields that can be configured are described below: