DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
543
Click the Clear All button to clear the information associated with all entries.
Click the Show Detail button to view more detailed information about the link-trace entry.
After clicking the Show Detail button, the following page will appear.
Figure 10-16 CFM Linktrace Settings (Show Detail) Window
Click the Back button to return to the previous window.
CFM Packet Counter
This window is used to find and display the CFM packet counter information.
To view the following window, click OAM > CFM > CFM Packet Counter, as shown below:
Figure 10-17 CFM Packet Counter Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit ID that will be used here.
Port
Select the Switch port that will be used here.
Type
Select the type of counter information that will be cleared or displayed here.
Options to choose from are All, TX, and RX.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear the counter information based on the information specified.
Click the Show All button to display all the entries.
Click the Clear All button to clear the counter information associated with all entries.
To Next Page
Loading...
