DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
594
Click the Find button to display entries in the table based on the information selected/entered.
Counters
This window is used to view and clear counter information.
To view the following window, click Monitoring > Statistics > Counters, as shown below:
Figure 13-13 Counters (Port) Window
The fields that can be configured are described below:
Parameter Description
Type
Select the type of information to display here. Options to choose from are Port
and VLAN.
Unit
Select the Switch unit that will be used in this display here.
From Port - To Port
Select the range of ports that will be used in this display here.
Click the Find button to display entries in the table based on the information selected.
Click the Refresh button to refresh the counter information displayed in the table.
Click the Clear button clear the counter information displayed in the table based on the information selected.
Click the Clear All button clear all the counter information displayed in the table.
Click the Show Detail button to view more detailed counter information on the specified port.
After clicking the Show Detail button, the following window will appear:
To Next Page
Loading...
