D-Link DGS-3630 SERIES - ISIS Redistribute Settings

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
379
Parameter Description
0 to 127. Select the Default option to use the default value.
Wide Metric Level-1
Enter the wider metric value that is assigned to the link and used to calculate the
cost from other routers via the links in the network to other destinations for level-1
routing here. The range is from 1 to 16777214. Select the Default option to use
the default value.
Wide Metric Level-2
Enter the wider metric value that is assigned to the link and used to calculate the
cost from other routers via the links in the network to other destinations for level-2
routing here. The range is from 1 to 16777214. Select the Default option to use
the default value.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
ISIS Redistribute Settings
This window is used to display and configure the ISIS redistribute settings. This is used to redistribute other protocol
routes into the ISIS routing domain.
To view the following window, click L3 Features > ISIS > ISIS Redistribute Settings, as shown below:
Figure 6-226 ISIS Redistribute Settings Window
The fields that can be configured are described below:
Parameter Description
Protocol
Select the protocol that will be used here. Options to choose from are IPv4 and
IPv6.
Area Tag
Enter the ISIS area tag here. This can be up to 16 characters long.
Redistribute Type
Select the redistribution type here. Options to choose from are:
• Connected - Specifies to redistribute connected routes into ISIS.
• Static - Specifies to redistribute static routes into ISIS.
• RIP - Specifies to redistribute RIP routes into ISIS.
• OSPF - Specifies to redistribute OSPF routes into ISIS
• BGP - Specifies to redistribute BGP routes into ISIS.
Metric
Enter the metric value of the redistributed routes here. The range is from 1 to 63.